Idea for LTD Hot Plate, Cold Plate, and Displacer

Discussion on Stirling or "hot air" engines (all types)
Post Reply
quarter33
Posts: 1
Joined: Sun Jul 24, 2016 5:59 pm

Idea for LTD Hot Plate, Cold Plate, and Displacer

Post by quarter33 »

I had an idea for a LTD Stirling Engine. Would it help to make the hot plate and the cold plate out of aluminum heat sink with the fins on the inside.
Mold the displacer to a shape that can go in the fins on both sides. I was thinking this would help to heat and cool the working fluid more rapidly.
Post Reply