Stirling engines with an internal spring question

Discussion on Stirling or "hot air" engines (all types)
Wellington
Posts: 143
Joined: Mon Apr 18, 2016 4:02 am

Re: Stirling engines with an internal spring question

Postby Wellington » Tue Jan 16, 2018 6:54 am

Wellington wrote:
Ian S C wrote:For displacers, I try to get somewhere about .010" to .015" thick,


will it still work almost as good if the 304 stainless tube is 1 or 2mm thick?

regards
Wellington

Ian S C
Posts: 2045
Joined: Thu Dec 02, 2010 5:15 am
Location: New Zealand

Re: Stirling engines with an internal spring question

Postby Ian S C » Wed Jan 17, 2018 2:32 am

Yes it will work, but anything over 1 mm is getting a bit heavy, the 2 mm thickness could be reduced by fitting it on a mandrel, and reducing the thickness by turning it in the lathe, you might have trouble with the welded seam, this is sometimes a bit hard.
Ian S C


Return to “Stirling and "Hot Air" Engine Forum”

Who is online

Users browsing this forum: Majestic-12 [Bot], Yahoo [Bot] and 104 guests