cold acceptor in cold head for cryocooler
Posted: Sat Jan 26, 2019 2:19 am
Dear friends,
I am new comer, I working on a Beta style cryocooler which cold head reside at one end.
I would like to know your comments on the position of cold acceptor in cold head related to displacer furthest reaching point.
Normally furthest reaching point of displacer is less than top end of cylinder, say 5 mm. The lowest edge of cold acceptor reside 12mm below the top end, that is to say the cold acceptor overlap with displacer stroke 7mm.
Feel free to give your opinion. Thank all for your valuable opinion.
Yaku
I am new comer, I working on a Beta style cryocooler which cold head reside at one end.
I would like to know your comments on the position of cold acceptor in cold head related to displacer furthest reaching point.
Normally furthest reaching point of displacer is less than top end of cylinder, say 5 mm. The lowest edge of cold acceptor reside 12mm below the top end, that is to say the cold acceptor overlap with displacer stroke 7mm.
Feel free to give your opinion. Thank all for your valuable opinion.
Yaku