"Hi...We are new here!" First posts here (or anywhere is OK)

Discussion on Stirling or "hot air" engines (all types)
nagesh.balam
Posts: 1
Joined: Tue May 21, 2013 2:39 am

Re: "Hi" We are new here!

Post by nagesh.balam » Tue May 21, 2013 2:43 am

hi,
i am here :big smile:

gwalsh
Posts: 2
Joined: Tue May 21, 2013 2:58 pm

Re: "Hi" We are new here!

Post by gwalsh » Wed May 22, 2013 2:34 pm

Hi,

I'm new here......

Have got a 'bought' stove-top stirling engine driving a fan to circulate the hot air into the room - a great wee gadget!

sstocker46
Posts: 1
Joined: Mon May 27, 2013 8:42 pm

Re: "Hi" We are new here!

Post by sstocker46 » Mon May 27, 2013 8:53 pm

Very interesting forum. I am trying to build one and this forum has been a great help, thanks. When I get one working will. Post some pics.

mariodaguilar
Posts: 2
Joined: Mon May 27, 2013 2:45 pm

Re: "Hi" We are new here!

Post by mariodaguilar » Mon May 27, 2013 10:44 pm

Me too! New here... I am a mechanical engineer currently building a can Stirling with my 6 yr old son. Great engines and very simple so they are ideal for educational projects

Saccotto
Posts: 3
Joined: Wed May 29, 2013 11:47 am

Re: "Hi" We are new here!

Post by Saccotto » Wed May 29, 2013 11:57 am

Hi!!! i'm new here, i came from italy and i've tried to make a stirling engine (gamma) for my final year thesis but after 4 months of hard work i failed..... i'm here to look for someone that can help me!!!! :cry: :cry: :cry: :cry: :cry:

Kliaudasha
Posts: 1
Joined: Thu Jun 06, 2013 8:20 am

Re: "Hi" We are new here!

Post by Kliaudasha » Sat Jun 08, 2013 10:35 am

Hi, looks like I found an extraordinary website just to succesfully build stirling engine :) I will be new here spying topics and reading your experience until one day I will finally build an efficient stirling :)

Tycho
Posts: 8
Joined: Sun Jun 09, 2013 9:28 pm

Re: "Hi" We are new here!

Post by Tycho » Sun Jun 09, 2013 9:33 pm

Hi from New Zealand.
I have a Beta type Stirling engine I am trying to identify so will post a note in the main forum :)

alberto_55
Posts: 10
Joined: Mon Jun 17, 2013 3:22 pm
Location: Spain
Contact:

Re: "Hi" We are new here!

Post by alberto_55 » Mon Jun 17, 2013 10:52 pm

Hello everyone!

The construction of these friendly engines gives me a really good time, so I was pleased to find this page with people who like the same.

I hope I can contribute something, although my experience is not very big, and my work is not tied to the industry.

This post is made with a translator, sorry for the bad grammar.

Greetings to all from Spain.

arganj
Posts: 1
Joined: Fri Jul 12, 2013 9:57 am

Re: "Hi" We are new here!

Post by arganj » Fri Jul 12, 2013 10:01 am

Hi..
am indonesian university student
my final project is about gamma stirling engine
nice join this forum

Hawke
Posts: 92
Joined: Sun Jul 14, 2013 12:04 pm

Re: "Hi" We are new here!

Post by Hawke » Sun Jul 14, 2013 12:27 pm

Hello all, Hawke here.
Joined to look around for a while. On my second LTD engine which I havent given up on yet, but learning about the dynamics and need for precision with these. (Displacer issues) I got interested in steam engines and have had some success on the lower skill level. I got sidetracked on looking ahead to make a generator to be driven by the steam engine. From there I was stung by my old electrical background and made a few model electric motors and generators.
Ordered a nice steam boiler yet to arrive, and thought I would dabble with these stirlings. Ratio of displacer chamber and piston size has my interest, seems this is a deeper science at this point than I expected.

My Model Electric Motor:
Model Electric Motor - variable speed

[BBvideo 425,350][/BBvideo]
What we need is a More Heat or More cold, and Less Friction or Better Air Seals ...and an Aspirin!
Sripto Vu-Lighter Historian http://www.thehawkeco.com

kristahiles111
Posts: 2
Joined: Thu Jul 18, 2013 12:31 am

Re: "Hi" We are new here!

Post by kristahiles111 » Thu Jul 18, 2013 12:44 am

Hello!
I am new member of this forum.
Thanks,

les-bart
Posts: 1
Joined: Fri Jul 26, 2013 2:35 am

Re: "Hi" We are new here!

Post by les-bart » Fri Jul 26, 2013 3:44 am

Hello all!
I am here too.

/Les from Norway

rick fish
Posts: 1
Joined: Mon Jul 29, 2013 6:02 pm

Re: "Hi" We are new here!

Post by rick fish » Mon Jul 29, 2013 6:21 pm

Hello,

Rick Fish here. I live near Saratoga NY. I am a process control engineer in the paper industry.

I've been looking for a new hobby since my kid went to college.

I have seen a ton of YouTube videos on fake magnet motors and gravity machines.

I thought I would come back to earth and learn a real technology.

I wish there was more on the internet about large stirling engines.

I hope to start small with the tincan engines and get bigger and bigger.

Sounds like fun, eh?

Ian S C
Posts: 2221
Joined: Thu Dec 02, 2010 5:15 am
Location: New Zealand

Re: "Hi" We are new here!

Post by Ian S C » Tue Jul 30, 2013 1:59 am

Welcome aboard rick fish, you should learn a little here. What sort of workshop do you have? If you get hooked, a small to middle size lathe would be handy, but as an engineer you'll know about that. Ian S C

RichardA
Posts: 2
Joined: Sun Aug 04, 2013 1:42 am

Re: "Hi" We are new here!

Post by RichardA » Sun Aug 04, 2013 1:46 am

Thank you for acceptting my registration. I am currently building a Heinrici Hot Air Engine

Regards

Richard

Post Reply