My alpha stirling engine dont work

Discussion on Stirling or "hot air" engines (all types)
Post Reply
Pachoras
Posts: 1
Joined: Wed Oct 23, 2019 9:34 am

My alpha stirling engine dont work

Post by Pachoras »

Hi guys, y build a alpha stirling engine but it dont work
https://ibb.co/CzVSbsK
I have been testing different configurations of crank length, dead volume and flywheel weight, but the engine does not move.
Please help.
Rafik_A
Posts: 5
Joined: Mon Nov 25, 2019 4:24 am

Re: My alpha stirling engine dont work

Post by Rafik_A »

Hello,
I had the same problem as you a long time ago.
For me it was just that the temperature was not high enough. For an alpha Stirling you need a very high temperature, more than 400 ° C.
You can help this engine run and put a iron wool in the base of the hot syringe. This helps the gas to take the hot temperature. You should also use a flame.
This video can help you, there is a very complete pdf to download in the description
https://www.youtube.com/watch?v=s79odgWz6BM

Rafik
Tom Booth
Posts: 3133
Joined: Tue Nov 07, 2006 2:03 am
Location: Fort Plain New York USA
Contact:

Re: My alpha stirling engine dont work

Post by Tom Booth »

I think the copper tubing (typically this type engine uses plastic tubing) might be a problem. Copper conducts heat almost instantaneously. The plastic conducts heat, not at all.

Resize_20220410_203805_5633.jpg
Resize_20220410_203805_5633.jpg (204.1 KiB) Viewed 2888 times
Post Reply