Robinson engine help needed...
Posted: Thu Sep 25, 2008 1:10 pm
I'm building a Robinson type engine and a bit stuck!
My engine has a power piston of 1.25" dia and a stroke of 2" the displacer cylinder is 4.5" dia and the stroke is 1.125" all these sizes were guessed as I have no drawings beyond museum pictures.
The displacer is a stainless cup filled with stainless pot cleaners (looks like swarf) with the open end of the cup facing down towards the heat.
It won't run! despite having quite a good power stroke.
Any help/suggestions would be appreciated.
My engine has a power piston of 1.25" dia and a stroke of 2" the displacer cylinder is 4.5" dia and the stroke is 1.125" all these sizes were guessed as I have no drawings beyond museum pictures.
The displacer is a stainless cup filled with stainless pot cleaners (looks like swarf) with the open end of the cup facing down towards the heat.
It won't run! despite having quite a good power stroke.
Any help/suggestions would be appreciated.